Skip to content
Serving Fremont and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (669) 279-3573

Heating Repair in Palo Alto, CA

Serving Palo Alto and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 279-3573

The short answer

ClimateEdge HVAC Service repairs gas furnaces and heat pumps in Palo Alto homes, starting with a full diagnosis before any parts are replaced. Bay Area Air District rules do not force you to replace a working furnace, so repair is often a reasonable choice. If replacement makes more sense, we explain how upcoming furnace rules and current incentives affect your options.

When your furnace or heat pump stops keeping up on a cold, damp Palo Alto evening, you want a clear answer about what's wrong and what it will take to fix it. ClimateEdge HVAC Service repairs gas furnaces, heat pumps, and ducted heating systems in homes across Palo Alto, including ZIP codes 94301, 94303, 94304, and 94306. Our technicians drive over from our base in Fremont, about 13 miles away. They find the actual problem, explain your options in plain terms, and repair what can sensibly be repaired.

How Palo Alto's Winters Affect Your Heating System

Palo Alto sits in the Santa Clara Valley, which has a Mediterranean climate with dry summers and mild, damp winters. Areas closer to the Bay tend to stay more moderate than the hotter inland parts of the valley. As a result, many Palo Alto heating systems sit idle for months. Then they run in short, frequent cycles once the rainy season starts.

That pattern causes its own problems. Dust settles on burners and flame sensors over the summer, and filters get overlooked. Igniters and capacitors that worked last spring can fail on the first chilly night. Damp weather can also affect outdoor heat pump units and condensate drains. Most heating calls are not dramatic breakdowns. They usually come down to small parts that stopped working after a long rest.

Common Heating Problems We Repair

We diagnose before we replace anything. Typical heating repairs in Palo Alto homes include:

  • Furnace won't light, or shuts off a few seconds after lighting (dirty flame sensor, failed igniter, pressure switch faults)
  • Blower runs, but the air from the vents is cool
  • Heat pump blowing cold air, stuck in defrost, or not switching into heat mode
  • Short cycling, where the system turns on and off every few minutes
  • Thermostat wiring or setting problems that look like equipment failure
  • Rattling, squealing, or a loud boom when the burners light
  • Weak airflow from clogged filters, disconnected ducts, or a failing blower motor
  • Condensate drain clogs that shut down high-efficiency furnaces
  • Tripped breakers or blown fuses on the furnace control board

What to Expect When We Come Out

Before you call, a few quick checks can save time. Make sure the thermostat is set to Heat and the temperature is set above the current room temperature. Check that the breaker hasn't tripped and that the furnace door panel is fully closed. Look at the filter too, because a badly clogged filter can make a furnace shut itself off.

If you smell gas, leave the house right away. Call your gas utility or 911 from outside before you contact us.

On a repair visit, our technician starts by asking what you noticed and when it began. Then we check the thermostat, power, filter, ignition sequence, safety switches, and airflow. On heat pumps we also check the outdoor unit and the defrost controls. On gas furnaces we inspect the venting and the heat exchanger area, because a heating system needs to be safe as well as warm.

Before any work begins, we explain what we found, what we recommend, and whether there are reasonable alternatives. If a part has to be ordered, we tell you that up front and suggest ways to stay comfortable in the meantime.

Repair or Replace? What Bay Area Rules Mean for You

Bay Area Air District appliance rules do not require you to replace a furnace that still works. They apply only when existing equipment fails or is replaced. If your furnace can be repaired safely and sensibly, repairing it is a valid choice.

Under the Air District's Rule 9-4, natural gas furnaces manufactured from 2029 on must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date. If your furnace is older and needs frequent repairs, include that timeline in your decision.

If you're considering a heat pump, be aware that the federal 25C tax credit has ended. It covered qualifying heat pumps placed in service before December 31, 2025, and does not apply to new installations. You can check BayREN and your local clean energy provider for current heat pump incentives. Amounts and availability change with each funding cycle, so we confirm the current offer before we include it in a quote.

Heating Repair in Palo Alto and Nearby Cities

Besides Palo Alto, we repair heating systems in Mountain View, East Palo Alto, Atherton, Menlo Park, and Sunnyvale. If you're not sure whether your address is in our service area, ask when you contact us and we'll let you know.

More services in Palo Alto

Related

What to expect

How a visit goes

  1. We diagnose first

    Before we replace a part or suggest new equipment, we test the system and pinpoint what's actually wrong. You'll know the cause, not just the symptom.

  2. We give you real options

    When there's more than one way to fix a problem, we explain each one, what it involves and how it affects your system going forward, so you can choose what works for your home and budget.

  3. We keep you informed on changing rules

    Air District appliance rules and incentive programs change over time. We explain how they apply to your situation and confirm current details before you make a decision.

FAQ

Common questions

Don’t see your question? Call (669) 279-3573 and we’ll talk it through.

Why does my furnace turn on and then shut off after a few seconds?

The most common cause is a dirty flame sensor. When the sensor can't confirm a flame, the furnace shuts the gas off as a safety step. A failing igniter, a pressure switch problem, or a blocked vent can cause the same symptom. A technician can test each part to find the actual cause.

Is it normal for my heat pump to blow cool air in winter?

During a defrost cycle, a heat pump may briefly blow cooler air. That's normal. If it blows cool air for long stretches, or the house never warms up, the problem could be the defrost controls, the reversing valve, the refrigerant charge, or the thermostat settings. Those problems need a diagnosis.

Do I have to replace my gas furnace because of Bay Area Air District rules?

No. The Air District's appliance rules do not require you to replace working equipment. They apply only when an existing furnace fails or is replaced. Gas furnaces manufactured from 2029 on must meet a zero-NOx standard, which matters if you plan to replace your furnace after that date.

Can I still get the federal tax credit for a heat pump?

No, not for new installations. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025. You can still check BayREN and your local clean energy provider for current incentives, and we confirm what's available before quoting it.

How do I know whether to repair or replace my heating system?

We look at the system's age and condition, the cost of the repair compared to the system's remaining life, how often it has broken down, and any safety concerns. We explain the tradeoffs plainly, and the decision is yours.

What should I do if I smell gas near my furnace?

Leave the house right away. Don't switch lights or appliances on or off. Call your gas utility or 911 from outside. Once the utility has made the home safe, we can diagnose and repair the furnace.

Have a Heating or Cooling Problem? Let's Find the Cause.

Tell us what's going on with your system, and we'll schedule a visit to diagnose it, explain what we find and go over your options. Planning a heat pump, mini-split or furnace replacement instead? We can talk that through too.

Call (669) 279-3573 Request Service